Pressured Power Pump Unit


In these days of energy conservation hot condensate is too valuable to be lost as it contains more than 25% of heat used in creating steam. Also it is distilled water making excellent feed water for boilers. UKL Pressure Power Pumps are pumps which are used to pump condensate to the desired location and are cheaper to operate against electrically operated pumps which require special impellers to avoid risk of cavitations by condensate and temperature limits of condensate to be handled.

Operating Animation

Return On Investment

The UPPPU is a skid mounted Assembly. The receiver collects the condensate from various points. The condensate flows through a Uni directional Disc Check Valve (DCV) to the pump section. The Float assembly, inside the pump section, rises with the level of the condensate and at a predetermined level snaps a valve open to let in Steam, while simultaneously a vent valve gets closed. The steam pushes the condensate out through the outlet DCV which too is unidirectional leading the condensate out to the desired point.

Once the pumping is done the level of condensate falls and the float drops down automatically closing the steam valve and opening the vent to vent out the accumulated steam and allow the fresh condensate to enter and begin the next cycle. This is a maintenance free pump, functions as long as there is condensate coming to the pump. Provided as a complete skid mounted unit, with valves, strainers, DCV, Condensate flow meter etc.

Sizes 40, 50, 80 x 50 and Duplex.

UKL Pressure Power Pump can be used with motive as Steam or Compressed Air.

Available in Carbon Steel Insulation can be provided as optional.

Pressure-Powered-Pump-UnitPressured Power Pump Unit
Datasheet (Metric)
Instruction Manual (Metric)

Datasheet (Imperial)
Instruction Manual (Imperial)

About Us
About Uni Klinger
Vision & Mission
Manufacturing Resources
Fluid Control Division
Fluid Sealing Division
Safety Valve and Control Valve Division
UKL Global Footprints
Fluid Control Division
Piston Valves
Bellow Seal Valves
Disc Check Valve
High Pressure Valve
Steam Traps
Thermodynamic Steam Traps
Thermostatic Steam Traps
Ball Float Traps
Clean Steam Trap
Inverted Bucket Traps
Bi Metallic Bi Thermostatic Trap
Automatic Pumping Trap
Trap Modules
Intelligent Trap Valve Station
High Pressure Thermodynamic Steam Trap Compact Module
Steam supply and Condensate return Manifolds
Pipeline Accessories
Air Vent & Air Vent Assembly
T & Y Type Strainers
Air Eliminators
Moisture Separators
Sight Glass
Pressure Reducing Station
Heat Recovery Products
Flash Vessels
Pressured Power Pump Unit
Steam Injectors
Deaerator Head
Liquid Level Gauges
Leak Tector
Hot Water Generation System
Fluid Sealing Division
Jointing Sheets
Compressed Asbestos Fiber (CAF)
Compressed Non-Asbestos Fiber (NCAF)
Expanded PTFE Sheets
Graphite sheet
Metallic/ Semi-Metallic Gaskets
Spiral Wound Gasket
Metal Jacketed Gasket
Kammprofile Gasket
Ring Joints
Gland Packing
Non-Asbestos Gland Packing
Industrial Gasket Division
Safety Valve and Control Valve Division
UKL-AST Safety Relief Valve
SMU-7000 Safety Relief Valve
SMFN -7000 & SU-7000 Safety Relief Valve
AST Spa Products
AST CV-8000 Control Valve
AST SMS-7100 Safety Valve for Steam Boiler
AST SVP-7200 Pilot Operated Safety Valve
Steam Engineering Services
More Industries
Fertilizer Industry
Aerated Concrete Block Industry
Tyre Industry
Rice Industry
Sugar Industry
Edible Oil Industry
Captive Cogen Industry
Soap Industry
Textile Industry
Chemical Industry
Hotel Industry
Pharma Industry
Brewery Industry
Dairy Industry
Rubber Industry
Case Study
Case Study-Textile Industries
Case Study-Chemical Industry
Case Study-Tyre Industry
Ask the Expert
Return On Invesment
ROI by Flash Vessel
ROI by Pressure Powered Pump
ROI by Pressure Reducing Station
Steam Engineering Guideline
Advantages of Steam
The Boiler
Contact Us
Enquiry Form
Sales and Factory Offices
Whats New