Air Vent & Air Vent Assembly

air-vent-assembly

UKL Air vents and assemblies are meant to automatically remove air from steam spaces.Air has to be removed because, Air acts as an insulator and severely hampers / restricts heat transfer.Air acts as an oxidizing agent and causes corrosion and weakening leading to damage and leakage in pipes and related equipment. In Boilers it can cause serious accidents.Air gets in the system through Boiler Feed water, at times through process related matters.

Also when steam condenses in long stoppages, in pipelines its volume shrinks tremendously causing a partial vacuum thus drawing in Air in the system from the atmosphere.

Air tends to accumulate towards the top/highest point, around changes in elevation / direction of pipes as also near Dead ends. So it is necessary to have Air vents at these points to vent the accumulated air and prevent any mal-effect on the system.

Removal of Air/O2 is achieved by mounting an Automatic Air vent in the form of a Thermostatic Trap, which in this case traps Steam but relieves Air automatically.

The Air vent assembly provided with Isolation valve, Air collecting Bottle and Temp/Pressure Gauge.

  • Sizes: 15,20mm
  • Ends connection: Socket Weld/Threaded
  • PMO: 32Bar
  • TMO: 240Deg C

Air Vent/Air Vent Assembly
Datasheet


Home
About Us
About Uni Klinger
Vision & Mission
Manufacturing Resources
Fluid Control Division
Fluid Sealing Division
Safety Valve and Control Valve Division
UKL Global Footprints
Products
Fluid Control Division
Valves
Piston Valves
Bellow Seal Valves
Disc Check Valve
High Pressure Valve
Steam Traps
Thermodynamic Steam Traps
Thermostatic Steam Traps
Ball Float Traps
Clean Steam Trap
Inverted Bucket Traps
Bi Metallic Bi Thermostatic Trap
Trap Modules
Intelligent Trap Valve Station
Manifolds
Pipeline Accessories
Air Vent & Air Vent Assembly
Strainers
Air Eliminators
Moisture Separators
Sight Glass
Pressure Reducing Station
Heat Recovery Products
Flash Vessels
Pressured Power Pump Unit
Steam Injectors
Deaerator Head
Liquid Level Gauges
Bitherm
Leak Tector
SmartWatch
Hot Water Generation System
Fluid Sealing Division
Jointing Sheets
Compressed Asbestos Fiber (CAF)
Compressed Non-Asbestos Fiber (NCAF)
Expanded PTFE Sheets
Graphite sheet
Metallic/ Semi-Metallic Gaskets
Spiral Wound Gasket
Metal Jacketed Gasket
Kammprofile Gasket
Ring Joints
Gland Packing
Non-Asbestos Gland Packing
Industrial Gasket Division
Safety Valve and Control Valve Division
UKL-AST Safety Relief Valve
SMU-7000 Safety Relief Valve
SMFN -7000 & SU-7000 Safety Relief Valve
AST Spa Products
AST CV-8000 Control Valve
AST SMS-7100 Safety Valve for Steam Boiler
AST SVP-7200 Pilot Operated Safety Valve
Steam Engineering Services
Solutions
More Industries
Fertilizer Industry
Aerated Concrete Block Industry
Tyre Industry
Rice Industry
Sugar Industry
Edible Oil Industry
Captive Cogen Industry
Soap Industry
Textile Industry
Chemical Industry
Paper Industry
Hotel Industry
Pharma Industry
Brewery Industry
Dairy Industry
Rubber Industry
Case Study
Case Study-Textile Industries
Case Study-Chemical Industry
Case Study-Paper Industry
Case Study-Tyre Industry
Ask the Expert
FAQs
Return On Invesment
ROI by Flash Vessel
ROI by Pressure Powered Pump
ROI by Pressure Reducing Station
Steam Engineering Guideline
Basic of Steam
What is Steam?
Water to Steam Formation
Properties of Steam
The Steam Phase Diagram
Type of Steam
Advantages of Steam
Benefits of Steam as Heat Transfer Media
Steam Network in Industries
The Boiler
Important Items in Steam Network
SWAI
Whats New
Contact Us
Sales and Factory Offices
Enquiry Form
Careers